21.
Turn on the computer.
22.
Enter the Service Tag (see
Entering the Service Tag in the BIOS
).
Entering the Service Tag in the BIOS
1.
Turn on the computer.
2.
Press <F2> during POST to enter the system setup utility.
3.
Navigate to the
Main
tab and enter the Service Tag in the
Service Tag Setting
field.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
NOTE:
After you have replaced the system board, enter the computer's Service Tag into the BIOS of the replacement system board.
Summary of Contents for Inspiron 410
Page 45: ...Back to Contents Page ...
