Dell Inspiron 410 Service Manual Download Page 15 | Manualshive

Page: 15 / 45

background image

Replacing the Drive Bay

1.

Follow the procedures in

Before You Begin

.

2.

Connect the hard-drive cable to the connector on the hard drive.

3.

Align the tabs on the drive bay with the slots on the chassis. Slide the drive bay towards the front of the computer to align the screw holes on the drive
bay with the screws holes on the chassis.

4.

Replace the two screws that secure the drive bay to the chassis.

5.

Replace the power-button bracket and replace the screw that secures the power-button bracket to the drive bay.

6.

Replace the optical drive (see

Replacing the Optical Drive

).

7.

Replace the top bracket (see

Replacing the Top Bracket

).

8.

Replace the top cover (see

Replacing the Top Cover

).

9.

Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

1

drive bay

2

screws (2)

3

hard-drive cable

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

«
...
13
14
15
16
17
...
»

Summary of Contents for Inspiron 410














































Reviews:

No comments

Related manuals for Inspiron 410

F50 RS/6000 7025

Brand: IBM Pages: 364

Brand: Medion Pages: 2

Brand: Everex Pages: 47

Brand: FabiaTech Pages: 65

Brand: Vivo Pages: 4

Brand: Wacom Pages: 340

Brand: Asus Pages: 87

Brand: Aaeon Pages: 89

Brand: Xtreamer Pages: 2

Brand: Dell EMC Pages: 36

Brand: Shuttle Pages: 23

Brand: AMSTRAD Pages: 395

WorkFit-A, Single LCD Mount, LD

Brand: Ergotron Pages: 14

Brand: ONKRON Pages: 2

LYNX-6000 Series

Brand: Portwell Pages: 18

Brand: Xerox Pages: 296

228350U - NetVista X41 - 2283

Brand: IBM Pages: 31

TRS-80 Model 16B

Brand: Radio Shack Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands