manualshive.com logo in svg

Dell Inspiron 410, Service Manual, Page: 25 / 45

Share
Download
Dell Inspiron 410 Service Manual Download Page 25

Back to Contents Page

  

 

 Optical Drive  

Dell™ Inspiron™ 410 Service Manual 

 

  

Removing the Optical Drive 

 

  

Replacing the Optical Drive 

 

 

 

 

 

 

 

Removing the Optical Drive  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the top cover (see 

Removing the Top Cover

).  

 

 

  

3.

Remove the top bracket (see 

Removing the Top Bracket

).  

 

 

  

4.

Disconnect the optical-drive cable from the connector on the optical drive.  
 

 

  

5.

Push and slide the optical drive out through the front of the computer.  
 

  

 

Replacing the Optical Drive  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Slide the optical drive into the drive bay.  
 

 

  

3.

Connect the optical-drive cable to the connector on the optical drive.  
 

 

  

4.

Replace the top bracket (see 

Replacing the Top Bracket

).  

 

 

  

5.

Replace the top cover (see 

Replacing the Top Cover

).  

 

 

 

 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

1 

optical-drive cable connector 

2 

drive bay 

3 

optical drive 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Inspiron 410














































Reviews:

No comments