manualshive.com logo in svg

Dell Inspiron 410, Service Manual, Page: 4 / 45

Share
Download
Dell Inspiron 410 Service Manual Download Page 4

Back to Contents Page

  

 

 Bottom Cover  

Dell™ Inspiron™ 410 Service Manual 

 

  

Removing the Bottom Cover 

 

  

Replacing the Bottom Cover 

 

 

 

 

 

 

 

Removing the Bottom Cover  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Turn the computer over.  
 

 

  

3.

Loosen the two captive screws that secure the bottom cover to the chassis.  
 

 

  

4.

Lift the bottom cover off the computer.  
 

  

 

Replacing the Bottom Cover  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Align the tabs on the bottom cover with the slots on the computer.  
 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

1 

captive screws (2) 

2 

bottom cover 

Summary of Contents for Inspiron 410














































Reviews:

No comments