Dell Inspiron 410 Service Manual Download Page 44

Page: 44 / 45

Back to Contents Page

Top Cover

Dell™ Inspiron™ 410 Service Manual

Removing the Top Cover

Replacing the Top Cover

Removing the Top Cover

Follow the procedures in

Before You Begin

Press the top cover release button at the back of the computer. The top cover will pop up.

Lift the top cover away from the computer.

Replacing the Top Cover

Follow the procedures in

Before You Begin

Align the tabs on the top cover with the slots on the computer and snap the top cover into place.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

top cover release button

top cover

tabs (3)

Summary of Contents for Inspiron 410














































Search results

Summary of Contents for Inspiron 410

Reviews:

Related manuals for Inspiron 410

Brands by name

Popular brands

Dell Inspiron 410, Service Manual

Search results

Summary of Contents for Inspiron 410

Reviews:

Related manuals for Inspiron 410

Brands by name

Popular brands