manualshive.com logo in svg

Dell Inspiron 410, Service Manual, Page: 42 / 45

Share
Download
Dell Inspiron 410 Service Manual Download Page 42

Back to Contents Page

  

 

 Top Bracket  

Dell™ Inspiron™ 410 Service Manual 

 

  

Removing the Top Bracket 

 

  

Replacing the Top Bracket 

 

 

 

 

 

 

 

Removing the Top Bracket  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the top cover (see 

Removing the Top Cover

).  

 

 

  

3.

Remove the two screws that secure the wireless antennas to the top bracket.  
 

  

 

 

4.

Remove the two screws that secure the top bracket to the chassis.  
 

 

  

5.

Lift the top bracket away from the computer.  
 

  

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

1 

screws (2) 

2 

wireless antennas (2) 

1 

screws (2) 

2 

top bracket 

Summary of Contents for Inspiron 410














































Reviews:

No comments