Dell DRAC 4 User Manual Download Page 165

Page: 165 / 232

racadm Subcommand Man Pages

165

NOTE:

The terms NIC and Ethernet management port may be used interchangeably.

Synopsis

racadm setniccfg -d

racadm setniccfg -s [<

ipAddress

> <

netmask

> <

gateway

racadm setniccfg -o

racadm getniccfg

Description for setniccfg

The

setniccfg

subcommand sets the controller IP address.

•

The

-d

option enables DHCP for the Ethernet management port (default is DHCP enabled).

•

The

-s

option enables static IP settings. The IP address, netmask, and gateway can be

specified. Otherwise, the existing static settings are used.

•

The

-o

option disables the Ethernet management port completely.

ipAddress

netmask

, and

gateway

must be typed as dot-separated strings.

Description for getniccfg

The

getniccfg

subcommand displays the current Ethernet management port settings.

Output

The

setniccfg

subcommand returns without output if successful. The

getniccfg

subcommand

output displays the following information:

Network adapter = Enabled/Disabled

DHCP = Enabled/Disabled

Static IP Settings: <

ipAddress

> <

netmask

> <

gateway

Current IP Settings: <

ipAddress

> <

netmask

> <

gateway

Table A-21. setniccfg/getniccfg

Subcommand

Definition

setniccfg

Sets the IP configuration for the controller.

getniccfg

Displays the current IP configuration for the controller.

Summary of Contents for DRAC 4









































































































































































































































Search results

Summary of Contents for DRAC 4

Reviews:

Related manuals for DRAC 4

Brands by name

Popular brands

Dell DRAC 4, User Manual

Search results

Summary of Contents for DRAC 4

Reviews:

Related manuals for DRAC 4

Brands by name

Popular brands