manualshive.com logo in svg

Dell DRAC 4, User Manual

The Dell DRAC 4 is a powerful Remote Access Card that enables users to remotely manage and control their Dell servers. Ensure seamless operation with the help of its user manual, available for free download on manualshive.com. This comprehensive manual offers detailed instructions and insights, empowering users to optimize their server management experience.

Share
Download
background image

Configuring and Using Virtual Media

115

Using Virtual Media When the Server’s Operating System Is Running

On Windows systems, the virtual media drives are mounted and given a drive letter. 
Using the virtual drives from within Windows is similar to using your physical drives. Once 
connected to the media at a management station, then the media is available at the system by 
simply clicking the drive and browsing its content.
On a Red Hat Enterprise Linux system, the virtual drives must be mounted before the drives 
can be accessed. Before mounting the drive, you must first connect to the media at the 
management station.
Red Hat Enterprise Linux automatically creates mount points in the 

/etc/fstab

 file for the 

virtual floppy and CD drives.
On a system running Red Hat Enterprise Linux, type the following command to quickly identify 
the assigned virtual media devices:

cat /var/log/messages | grep VIRTUAL

The virtual CD has an entry for a device named 

/dev/cdromX

   (where 

X

 is an optional index 

that is assigned by Red Hat Enterprise Linux). Normally, the virtual CD drive is named 

/dev/cdrom1

 and the local CD drive is named 

/dev/cdrom

.

The virtual floppy drive has an entry for a device named 

/dev/floppyX

 (where 

X

 is an 

optional index that is assigned by Red Hat Enterprise Linux). Depending upon whether or not 
there is a local floppy drive, the virtual floppy drive is named 

/dev/floppy

 or 

/dev/floppy1

.

Enabling and Disabling the Virtual Media Feature

Virtual media can be enabled and disabled using the 

racadm

 command. You can run this 

command at any time; however, enabling or disabling the virtual media feature does not take 
effect until you restart your system.

 

NOTE: 

You cannot use the GUI interface to enable or disable virtual media. 

After system restart, the DRAC 4 IDE Option ROM utility will time-out after about 15 seconds 
(about 7.5 seconds per virtual device) when the virtual media feature is disabled. 
The virtual media feature is enabled by default. When disabled, DRAC disables the virtual 
CD/floppy diskette drives from the IDE bus and generates the following messages:

Drive Number: 0 failed to detect Virtual device

Drive Number: 1 failed to detect Virtual device

To enable the virtual media feature, type the following command. The default flag state is 0, 
indicating that the feature is enabled.

racadm config -g cfgRacVirtual -o cfgVirMediaDisable 0

Summary of Contents for DRAC 4









































































































































































































































Reviews:

No comments

Related manuals for DRAC 4

Federal Signal Corporation UltraVoice Installation, Operation And Service Manual preview
UltraVoice
Brand: Federal Signal Corporation Pages: 60
FASTRON. VC-210 Installation And Operating Instructions Manual preview
VC-210
Brand: FASTRON. Pages: 16
Lamtec FA1 Quick Reference preview
FA1
Brand: Lamtec Pages: 22
ZKTeco SRB Connection Manual preview
SRB
Brand: ZKTeco Pages: 2
Apricus Sentinel S4 Mounting, Connection, Operation preview
Sentinel S4
Brand: Apricus Pages: 32
Analog Devices Linear Technology ADI Power DC3017A Demo Manual preview
Linear Technology ADI Power DC3017A
Brand: Analog Devices Pages: 12
Renogy Rover 100A Manual preview
Rover 100A
Brand: Renogy Pages: 36
Linear Technology LTC3553EPD Quick Start Manual preview
LTC3553EPD
Brand: Linear Technology Pages: 5
SYCLOPE TERE'O Communications Instructions preview
TERE'O
Brand: SYCLOPE Pages: 28
Infineon Technologies CYPRESS Traveo S6J335 Series Manual preview
CYPRESS Traveo S6J335 Series
Brand: Infineon Technologies Pages: 308
YASKAWA mp2500 User Manual preview
mp2500
Brand: YASKAWA Pages: 348
Aaeon TKS-G20-LN05 Manual preview
TKS-G20-LN05
Brand: Aaeon Pages: 54
Elan gSC2 Quick Install Manual preview
gSC2
Brand: Elan Pages: 2
Oki ML66592 User Manual preview
ML66592
Brand: Oki Pages: 466
Dahua DHI-IPMECS-2201C User Manual preview
DHI-IPMECS-2201C
Brand: Dahua Pages: 34
Cypress Universal CapSense CY3280-22x45 Manual preview
Universal CapSense CY3280-22x45
Brand: Cypress Pages: 55
AMCOL 6000-ETC Operator'S Manual preview
6000-ETC
Brand: AMCOL Pages: 11
Ecus POWER_AVR SVR TRI 3/3 User Manual preview
POWER_AVR SVR TRI 3/3
Brand: Ecus Pages: 58

Brands by name

Popular brands

Load more brands