manualshive.com logo in svg

Dell DRAC 4, User Manual

Share
Download
Dell DRAC 4 User Manual Download Page 123

Configuring and Using Virtual Media

123

Why does the 

Eject

 command fail to work?

The 

Eject

 command fails to work with Virtual CD 

devices if no Virtual Media client was connected at the 
time the Red Hat Enterprise Linux host was booted.

To eject CD media from a Virtual CD device in this 
situation, ensure that the CD is not mounted, and 
then press the 

Eject

 button on the client CD drive.

I was using Internet Explorer and I did not install 
the Virtual Media plug-in when I was prompted to 
do so. Now, I can’t use the Virtual Media feature.

To return to the dialog box for installing the Virtual 
Media plug-in, you can navigate away from the 

Media

 

page and then navigate back to it to be prompted for 
the plug-in installation again.

A user has established a Virtual Media 
connection, but forgot about it. How can another 
user remove this connection?

Use the 

racadm vmdisconnect

 command to 

forcibly disconnect the virtual media connection

Why do error messages like the following display 
on the console when Red Hat Enterprise Linux 
boots a Dell server with a DRAC 4 present?

... other console startup 
messages ...

Apr 16 14:48:27 localhost 
kernel: hde: VIRTUALFLOPPY 
DRIVE, ATAPI FLOPPY drive

Apr 16 14:48:27 localhost 
kernel: hdf: VIRTUALCDROM 
DRIVE, ATAPI CD/DVD-ROM drive

Apr 16 14:48:27 localhost 
kernel: ide0 at 0x1f0-
0x1f7,0x3f6 on irq 14

Apr 16 14:48:27 localhost kernel: 

ide-floppy: hde: I/O error, 

pc = 23, key = 2, asc = 3a, 

ascq = 0

Apr 16 14:48:27 localhost 
kernel: ide-floppy: Can't get 
floppy parameters

... other console startup 
messages ...

The Red Hat Enterprise Linux IDE driver writes all 
error responses that it receives to the console log for 
diagnostic purposes. However, in this case, the 
messages are not indications of any real errors and 
should be ignored.

The reason these error responses are generated is 
because a Virtual Media client is not connected to the 
DRAC 4 management board while the system is being 
booted, but the Red Hat Enterprise Linux IDE driver 
is requesting information regarding the Virtual floppy 
media size. This information is not available until a 
Virtual Media client connects its floppy device to the 
DRAC 4.

The error response, in this case, (key=2, asc=3a) from 
the DRAC 4 hardware indicates "media not present."

Table 7-1.  Using Virtual Media: Frequently Asked Questions 

(continued)

Question

Answer

Summary of Contents for DRAC 4









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands