Dell DRAC 4, User Manual

Page: 170 / 232

170
racadm Subcommand Man Pages
www
.dell.com | support.dell.com
Output
The serveraction command returns without output if successful.
getraclog
NOTE:
To use this command, you must have Log In DRAC 4 permission.
Table A-29 describes the getraclog command.
Synopsis
racadm getraclog -i
racadm getraclog [-A] [-c count ] [ delay-seconds ]\[-s start-
record ] [-v] [-V] [-m]
Description
NOTE:
The command name and the racadm subcommand names may be different. This is normal.
The getraclog -i command displays the number of entries in the DRAC 4 log.
The following options allow the getraclog command to read entries:
• -A — Provides API-formatted output (no header).
• -c — Provides the maximum count of entries to be returned.
• <
blank
> — Displays the entire log; racadm and serial only (default).
• -d — Provides the number of seconds to delay the recording of any new log entries.
• -s — Provides the associated number of the first displayed entry (default = 0 [list begins with
the first DRAC 4 log entry]).
• -v — Provides
verbose
output.
• -V — Provides
Very verbose
output.
• -m — Displays 24 rows at a time, and queries for more (such as the UNIX more command).
Output
One line of output is displayed for each DRAC 4 log entry.
Table A-29. getraclog
Command Definition
getraclog -i Displays the number of entries in the DRAC 4 log.
getraclog Displays the DRAC 4 log entries.