Dell DRAC 4 User Manual Download Page 163

Page: 163 / 232

racadm Subcommand Man Pages

163

getractime

NOTE:

To use this command, you must have

permission.

Table A-17 describes the

getractime

subcommand.

Synopsis

racadm getractime [-u] [-d]

Description

The

getractime

subcommand displays the time in one of the following two formats:

•

u — The UTC hexadecimal value followed by the offset in signed decimal (default).

•

d — The

yyyymmddhhmmss.mmmmmms

off

string with no option is displayed in the same

format as the UNIX

date

command.

Output

The

getractime

subcommand displays the output on one line.

ifconfig

NOTE:

To use this command, you must have

Execute Diagnostic Commands

Configure DRAC 4

permission.

Table A-18 describes the

ifconfig

subcommand.

Synopsis

racadm ifconfig

Table A-17. getractime

Subcommand

Definition

getractime

Displays the time from the controller.

Table A-18. ifconfig

Subcommand

Definition

ifconfig

Displays the contents of the network interface table.

Summary of Contents for DRAC 4









































































































































































































































Search results

Summary of Contents for DRAC 4

Reviews:

Related manuals for DRAC 4

Brands by name

Popular brands

Dell DRAC 4, User Manual

Search results

Summary of Contents for DRAC 4

Reviews:

Related manuals for DRAC 4

Brands by name

Popular brands