Dell DRAC 4 User Manual Download Page 37

Page: 37 / 232

Installing and Setting Up the DRAC 4

DNS Configuration Options

Servers from DHCP

The available settings are

Disabled

and

Enabled

. Press <u> to toggle the

setting. The default setting is

Disabled

, which indicates that the DRAC 4 is

using preset static IP addresses. When this option is selected, the DHCP server
provides the DNS server IP addresses.

Use DHCP

(described earlier in this table) is set to

Disabled

, this option is

grayed out and you cannot modify this field.

Static DNS Server 1:

Indicates the preset static IP address of the first DNS server that the DRAC 4
uses if

Servers from DHCP

is disabled. The default is 192.168.0.5. Press <1> to

change this address. If

Servers from DHCP

Enabled

, this option is grayed out

and you cannot modify this field.

Static DNS Server 2:

Indicates the preset static IP address of the second DNS server that the DRAC 4
uses if

Servers from DHCP

is disabled. The default is 192.168.0.6. Press <2> to

change this address. If you do not have a second DNS server, you may enter
0.0.0.0 for the IP address. If

Servers from DHCP

Enabled

, this option is

grayed out and you cannot modify this field.

The available settings are

Disabled

and

Enabled

. Press <c> to toggle the setting.

The default setting is

Disabled

. The default RAC name is RAC-

service tag

, where

service tag

is the service tag number of the Dell server (for example, RAC-

EK00002). When this option is selected, the RAC name is displayed. You can
modify the RAC name only when toggling from the

Disabled setting

. If this

option is set to

Enabled

, you can modify the RAC name by pressing <c> twice.

Static Domain
Name

The default setting is

Disabled

. The default static domain name is

MYDOMAIN.

Press <f> to toggle the setting. When this option is selected,

the static domain name is displayed. You can modify the domain name only
when toggling from the

Disabled setting

by pressing <f>. However, if

Use

DHCP

(described earlier in this table) is set to

Disabled

, you cannot set

Static

Domain Name

Disabled

. If

Disabled

, this option is

grayed out and you cannot modify this field.

Virtual Media Configuration Options

Virtual Media is:

Indicates whether Virtual Media is enabled or disabled. Press <e> to toggle
the setting.

Table 2-1. DRAC 4 IDE Option ROM Utility Properties

(continued)

Properties

Description

Summary of Contents for DRAC 4









































































































































































































































Search results

Summary of Contents for DRAC 4

Reviews:

Related manuals for DRAC 4

Brands by name

Popular brands

Dell DRAC 4, User Manual

Search results

Summary of Contents for DRAC 4

Reviews:

Related manuals for DRAC 4

Brands by name

Popular brands