manualshive.com logo in svg

Dell DRAC 4, User Manual

Share
Download
Dell DRAC 4 User Manual Download Page 106

106

Using Console Redirection

www

.dell.com | support.dell.com

Frequently Asked Questions

Table 6-4 lists frequently asked questions and answers.

Table 6-3.  Other Console Redirection Page Buttons

Button

Action

Print

Prints the 

Console Redirection 

page. 

Refresh

Reloads the

 Console Redirection

 page. 

Table 6-4.  Using Console Redirection: Frequently Asked Questions 

Question

Answer

I have just installed the Sun 
Java Runtime Environment on 
a management station running 
the Microsoft

®

 Windows

®

 XP 

operating system. Do I have to 
reboot the system?

You must reboot your system after you install the Sun Java Runtime 
Environment to complete the installation.

Why doesn’t the default video 
driver for Novell

®

 Netware

®

 

6.5 work correctly at 800x600 
screen resolution when using 
console redirection?

To correct this problem, go to the screen resolution setting and select 

ATI RADEON VE, 32MB

. The resolution selection is not limited to 

1024x768. Do not select any resolution higher than 1024x768. Console 
Redirection supports these resolutions: 640x480, 800x600, and 
1024x768.

During console redirection, the 
keyboard and mouse became 
locked after coming back from 
hibernation on a Windows 
2000 system. What caused this 
to happen?

To resolve this issue, you must reset the DRAC 4 by running the 

racadm 

racreset

 command. If the problem is still not resolved, you must reset the 

DRAC 4 by running the 

racadm racreset hard

 command.

During console redirection, the 
mouse became locked after 
coming back from hibernation 
on a Windows 2003 system. 
Why did this happen?

To resolve this issue, select a different operating system than Windows 
for mouse acceleration from the virtual KVM (vKVM) window pull-
down menu, wait 5 to 10 seconds, and then select Windows again. If the 
problem is not resolved, you must reset the DRAC 4 by running the 

racadm racreset

 command.

If the problem is still not resolved, you must reset the DRAC 4 by 
running the 

racadm racreset hard

 command.

Why does the remote console 
get a blank screen in BIOS or 
DOS?

You may have an old version of the ATI video BIOS or a bad ATI chip.

Summary of Contents for DRAC 4









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands