Figure 52. Removing the NDC
1.
captive screw socket (2)
2. connector on the system board
3. captive screw (2)
4. touch point (2)
5. network daughter card (NDC)
6. back panel slot for Ethernet connectors
Next steps
1.
Install the NDC.
2.
If removed, install the expansion card(s) on the expansion card riser 2.
3.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing an expansion card from expansion card riser 2 or 3
Installing an expansion card into the expansion card riser 2 or 3
Installing the network daughter card
After working inside your system
126
