Dell Dimension C521 Owner'S Manual Download Page 99

Page: 99 / 140

Appendix

Drives

Diskette Drive

(

Internal

default)

This option enables or disables the floppy drive. The options are

Off

USB

Internal

and

Read Only

NOTE:

USB

is selected, ensure that USB Controller setup option under Onboard

Devices is set to

Drive 0: (SATA-0)

(

default)

Identifies and enables and disables the drives attached to the SATA connectors on the
system board and lists the capacities for the hard drives.

Drive 1: (SATA-1)

(

default)

Identifies and enables and disables the drives attached to the SATA connectors on the
system board and lists the capacities for the hard drives.

SMART Reporting

(

Off

default)

This setting determines whether integrated drive errors are reported or not during
system startup.

Onboard Devices

Integrated NIC

(

default)

Enables or disables the integrated NIC controller.

Settings are

Off

On w/ PXE, or On

w/RPL

. When the

On w/ PXE

or the

On w/RPL

setting is active, if a boot routine is not

available from the network server, the computer attempts to boot from the next device in the
boot sequence list.

Integrated Audio

(

default)

Enables or disables the onboard audio controller.

USB Controller

(

default)

Enables or disables the internal USB controller.

No Boot

enables the controller but

disables the ability to boot from a USB device.

NOTE:

Operating systems with USB support will recognize USB floppy drives regardless

of the

No Boot

setting.

Rear Dual USB0

(

default)

Enables or disables the indicated group of USB ports on the back of the computer.

Rear Dual USB1

(

default)

Enables or disables the indicated group of USB ports on the back of the computer.

Front USB

(

default)

Enables or disables the indicated group of USB ports on the front of the computer.

Summary of Contents for Dimension C521













































































































































Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands

Dell Dimension C521, Owner'S Manual

Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands