Dell Dimension C521 Owner'S Manual Download

Page: 87 / 140

Removing and Installing Parts

Removing a CD/DVD Drive

Follow the procedures in "Before You Begin" on page 59.

NOTICE:

Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to the cables

and the cable connectors.

Pull up on the drive release latch and slide the drive towards the back of the computer. Then, lift up to
remove the drive from the computer.

Disconnect the power and data cables from the back of the drive.

Replace the computer cover (see "Replacing the Computer Cover" on page 90).

NOTICE:

To connect a network cable, first plug the cable into the network port or device, and then plug it into the

computer.

Connect your computer and devices to electrical outlets, and then turn them on.

Installing a CD/DVD Drive

Follow the procedures in "Before You Begin" on page 59.

Unpack the drive and prepare it for installation.

drive release latch

CD/DVD drive

Summary of Contents for Dimension C521













































































































































Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands

Dell Dimension C521, Owner'S Manual

Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands