Dell Dimension C521 Owner'S Manual Download

Page: 26 / 140

Setting Up and Using Your Computer

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTICE:

Plug the network cable into the network adapter connector on the computer. Do not plug the network

cable into the modem connector on the computer.

NOTICE:

Do not plug a network cable into a telephone wall jack.

Connect the network cable to the network adapter connector on the back of your computer.

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

Connect the other end of the network cable to a network device.

Network device

network adapter connector

network cable

network connector on the
back of the computer

Summary of Contents for Dimension C521













































































































































Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands

Dell Dimension C521, Owner'S Manual

Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands