manualshive.com logo in svg

Dell Dimension C521, Owner'S Manual, Page: 12 / 140

Share
Download
Dell Dimension C521 Owner'S Manual Download Page 12

12

Finding Information

• How to reinstall my operating system

Operating System CD

NOTE: 

The 

Operating System

 CD may be optional and may 

not ship with your computer.

The operating system is already installed on your computer. 
To reinstall your operating system, use the 

Operating 

System

 CD (see "Restoring Your Operating System" on 

page 54).

NOTE: 

If you reinstall the operating system for your 

computer, you should reinstall the DSS utility prior to 
installing any drivers. 

After you reinstall your 
operating system, use the 

Drivers and Utilities

 CD 

(

ResourceCD

)

 

to reinstall 

drivers for the devices that 
came with your computer.

Your operating system 
product key label is located 
on your computer.

NOTE: 

The color of your CD 

varies based on the operating system you ordered.

What Are You Looking For?

Find It Here

Summary of Contents for Dimension C521













































































































































Reviews:

No comments