Dell Dimension C521 Owner'S Manual Download Page 83

Page: 83 / 140

Removing and Installing Parts

Attach the power and data cables to the floppy drive.

Locate the correct guidance-slot for the drive (slot 2) and align the shoulder screws with the screw
guides.

Slide the drive into the bay until it clicks into place.

Connect the data cable to the connector labeled "FLOPPY" on the system board (see "System Board
Components" on page 63).

Replace the CD/DVD drive.

Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.

Replace the computer cover (see "Replacing the Computer Cover" on page 90).

NOTICE:

To connect a network cable, first plug the cable into the network port or device, and then plug it into the

computer.

Connect your computer and devices to electrical outlets, and then turn them on.

Media Card Reader

For information about using the Media Card Reader, see "Using a Media Card Reader (Optional)" on
page 24.

floppy drive

slot verification number

Summary of Contents for Dimension C521













































































































































Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands

Dell Dimension C521, Owner'S Manual

Search results

Summary of Contents for Dimension C521

Reviews:

Related manuals for Dimension C521

Brands by name

Popular brands