manualshive.com logo in svg

Dell Dimension C521, Owner'S Manual, Page: 103 / 140

Share
Download
Dell Dimension C521 Owner'S Manual Download Page 103

Appendix

103

Changing Boot Sequence for the Current Boot

You can use this feature, for example, to restart your computer to a USB device, such as a floppy drive, 
memory key, or CD-RW drive.

 

NOTE: 

If you are booting to a USB floppy drive, you must first set 

Diskette Interface

 to 

Disabled

 in system setup 

(see "System Setup" on page 97).

1

If you are booting to a USB device, connect the USB device to a USB connector (see "Front View of the 
Computer" on page 13).

2

Turn on (or restart) your computer.

3

When 

F2 = Setup, F12 = Boot Menu 

appears in the upper-right corner of the screen, 

press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the 
Microsoft Windows desktop, then shut down your computer (see "Turning Off Your Computer" on 
page 59) and try again.

4

Press <F1> to continue.

The 

Boot Menu

 appears, listing all available boot devices.

5

Use the arrow keys to select the appropriate device (for the current boot only).

 

NOTE: 

To boot to a USB device, the device must be bootable. To ensure that a device is bootable, check the device 

documentation.

Changing Boot Sequence for Future Boots

1

Enter system setup, select 

Boot Sequence 

from the 

System 

group (see "System Setup Options" on 

page 98).

2

Press <Enter> to access the menu.

 

NOTE: 

Write down your current boot sequence in case you want to restore it.

3

Press the up- and down-arrow keys to highlight the appropriate 

Boot Sequence 

option.

4

Press the 

U

 or 

D

 keys to move the option 

up

 or 

down

 in the boot sequence.

5

Press <Enter> to 

Save

 the changes or <Esc> to 

Cancel

.

Summary of Contents for Dimension C521













































































































































Reviews:

No comments