Connecting DS60 shelves
The cabling diagrams in this section show maximum configurations. Not all systems will have all the disk shelves shown in the
diagrams.
When connecting DS60 shelves, all the cables have HD-mini-SAS connectors at both ends.
Add shelf-to-shelf cables between shelves in a loop and to the controller as shown in the diagrams.
Connect an FS25 shelf with DS60 shelves (HA systems)
Connect the FS25 shelf to the controller as shown in the diagrams.
●
Cable the SSD shelf on its own loop, separate from the DS60 shelves.
●
The SSD shelf counts towards the total number of shelves connected to the system.
DD9400 with DS60 cabling
The diagram shows the system cabled in two sets of two shelves each. The FS25 SSD shelf is cabled as a separate set from the
DS60 shelves.
Table 10. DD9400 with DS60 cabling instructions: Single node or HA primary node
String
HBA Port
Shelf Port
Cable Color in Cabling
Diagram
1
7A
LCC A, port 0 of shelf V1.1
3M
Red
1
3A
LCC B, port 0 of shelf V1.2
3M
2
7B
LCC A, port 0 of shelf V2.1
3M
Yellow
2
3B
LCC B, port 0 of shelf V2.2
3M
3
7C (HA only)
LCC B, port A of shelf V3.1 (FS25)
3M
Gold
3
3C (HA only)
LCC A, port A of shelf V3.1 (FS25)
3M
a.
Cable lengths shown are designed for Dell EMC racks. Longer cables (up to 5M) can be used.
Table 11. DD9400 with DS60 cabling instructions: HA standby node (HA only)
String
HBA Port
Shelf Port
Cable Color in Cabling
Diagram
1
7A
LCC A, port 2 of the shelf V1.2
3M
Purple
1
3A
LCC B, port 2 of shelf V1.1
3M
2
7B
LCC A, port 2 of shelf V2.2
3M
Blue
2
3B
LCC B, port 2 of shelf V2.1
3M
3
7C
LCC B, port B of shelf V3.1 (FS25)
3M
Gold
3
3C
LCC A, port B of shelf V3.1 (FS25)
3M
a.
Cable lengths shown are designed for Dell EMC racks. Longer cables (up to 5M) can be used.
Table 12. DD9400 with DS60 cabling instructions: DS60 to DS60
String
First Shelf Port
Second Shelf Port
Cable Color in Cabling
Diagram
1
LCC A, port 2 of
shelf V1.1
LCC A, port 0 of shelf V1.2
Green
Connect Cables and Power On
55
Summary of Contents for PowerProtect DD9400
Page 1: ...Dell EMC PowerProtect DD9400 System Installation Guide September 2020 Rev 03...
Page 57: ...Figure 65 Single node DD9400 with DS60 shelves Connect Cables and Power On 57...
Page 58: ...Figure 66 HA DD9400 with DS60 shelves 58 Connect Cables and Power On...
Page 63: ...Figure 72 Routing cables through the CMA brackets Connect Cables and Power On 63...