CL5431
Figure 28. Sliding the shelf chassis into the rails
NOTE:
You might need to release sagging tension on the shelf by pulling the lift arms and tray up slightly.
4. Unlock the casters by lifting the locking tabs, as shown in the following figure, and carefully slide the shelf into the cabinet
as far as the lift allows.
CL5424
Figure 29. Unlocking the casters
5. Lock all four casters by pressing down on the locking tab, as shown in the following figure, so the lift does not roll as the
shelf is pushed into the cabinet.
Install the Disk Shelves in the Rack
33
Summary of Contents for PowerProtect DD9400
Page 1: ...Dell EMC PowerProtect DD9400 System Installation Guide September 2020 Rev 03...
Page 57: ...Figure 65 Single node DD9400 with DS60 shelves Connect Cables and Power On 57...
Page 58: ...Figure 66 HA DD9400 with DS60 shelves 58 Connect Cables and Power On...
Page 63: ...Figure 72 Routing cables through the CMA brackets Connect Cables and Power On 63...
