Deitz Pharmafill TC3, Operation Manual

Page: 65 / 84

Rev 2022-03-08 Pharmafill Model TC3 User Manual
Deitz Company Inc. TC3 User Manual Page 53
10.2 - CYCLE OF OPERATION
When power is on, the counting function is active and anything that passes through the
counting window will be tallied.
Run Mode
1. If RUN button is pressed (latch)
2.
Glass disc rotates at high speed
Feeder starts
If tally >= SLOWDOWN COUNT,
3. Glass disc rotates at low speed (set by percent)
If tally=TARGET COUNT
4. Divider flag flips
Count tally reset to zero
Glass disc resumes HIGH speed
5. If RUN button is pressed again (unlatch)
Glass disc stops
Feeder stops
Fill One Cycle
1. If ENTER button is pressed (momentary)
2.
Glass disc rotates at high speed
Feeder starts
If tally >= SLOWDOWN COUNT,
3. Glass disc rotates at low speed (set by percent)
If tally=TARGET COUNT
4. Divider flag flips
Count tally reset to zero
Glass disc stops
Feeder stops
Excess pills are counted and tally is maintained
Check Count Cycle
1. If ENTER button is pressed (momentary)
2.
Glass disc rotates at high speed
Feeder starts
5. If CHECK COUNT button is pressed again (unlatch)
Glass disc stops
Feeder stops
Count tally reset to zero