Deitz Pharmafill TC3, Operation Manual

Page: 37 / 84

Rev 2022-03-08 Pharmafill Model TC3 User Manual
Deitz Company Inc. TC3 User Manual Page 25
7.10 - Menu 6. Technician Only
(revised 2009-11-17)
The Technician Only menu is for adjusting certain
parameters that are not normally changed, but are
available for the technician for special cases:
•
Slowdown percentage for the feeder and
disc speeds.
•
On/off status of the three bottle sensors.
1. Press
MENU
2. Use the UP

or DOWN

arrow buttons to
scroll to “
6. Technician Only
”.
3. Press ENTER to select Technician Only mode.
The following settings set the slowdown speed as
a percentage of the preset speed (which was set
using the FEEDER SPEED and DISC SPEED
buttons).
The “
ADJUST VALUE
” knob is an encoder-type
switch. It will rotate in either direction without
limit, but the value will not decrease or increase
beyond the correct range or limits
4.
Feeder Slowdown %
Rotate the “
ADJUST VALUE
” knob clockwise
to increase the number, counter-clockwise to
decrease the number.
Press
ENTER to accept the new value. Press
CLEAR to exit without saving.
5.
Disc Slowdown %
Rotate the “
ADJUST VALUE
” knob clockwise
to increase the number, counter-clockwise to
decrease the number.
Press
ENTER to accept the new value. Press
CLEAR to exit without saving.
ADJUST VALUE
KNOB