Deitz Pharmafill TC3, Operation Manual

Page: 29 / 84

Rev 2022-03-08 Pharmafill Model TC3 User Manual
Deitz Company Inc. TC3 User Manual Page 17
7.5 - Menu 1. Adjust Settings
(revised 2009-11-17)
The menu buttons work in the following manner:
•
Press MENU to access the menu items.
•
Use the UP

and DOWN

arrow to scroll
through the menu selections.
•
Press ENTER to make your selection.
•
Press CLEAR to exit Menu Mode at any time.
1. ADJUST SETTINGS is used to change the
preset values:
•
Target Count
•
Slowdown Count,
•
Trap Max Count
•
Flag Delay
•
Drop Time
•
Index Time
Rotate the “
ADJUST VALUE
” knob clockwise
to increase the number, counter-clockwise to
decrease the number.
Press
ENTER to accept the new value.
The “
ADJUST VALUE
” knob is an encoder-type
switch. It will rotate in either direction without
limit, but the value will not decrease or increase
beyond the correct range or limits
TARGET COUNT – This is the total number of
pills to be counted into each bottle. When the
desired value is displayed, press ENTER.
SLOWDOWN COUNT – When the Current
Count exceeds the Slowdown Count, the feeder
and disc speed will slow down (see Sec. 7G) until
the target count is reached, then normal speed will
resume. This produces greater accuracy at the
moment the target count is reached, when the
divider flag flips to start a new count. The value is
usually 10 to 20 less than the Target Count
ADJUST VALUE
KNOB