Deitz Pharmafill TC3, Operation Manual

Page: 41 / 84

Rev 2022-03-08 Pharmafill Model TC3 User Manual
Deitz Company Inc. TC3 User Manual Page 29
Section 8 – COUNTING & FILLING
8.1 - Product Guide Adjustments
1
The Product Guides must be adjusted to create a
steady flow of product down the channel, into the
chute and through the center of the counting
window. The flow must be single file, one level
high. There are five adjustments.
1. Adjustment 1 - WIDTH
The width of the channel is adjusted by moving
the Guide Block Assembly side-to-side. So that
the Guide Block will open fully, make sure that
the Guide Plate depth is not limiting the travel.
Loosen the two knobs on the Guide Plate Clamp
and slide the plate to the front (towards you).
Width Adjustment
To adjust, begin by loosening the knob and
moving the guide block to the left.
Place a few pills in the channel and move the
guide to the right so that only a single file row
may pass down the channel. Leave enough room
so that the product will flow freely. Tighten the
knob.
Note the width setting on the Guide Block Scale.
Note if you are in the WIDE or NARROW zone.
2
4
5
3
GUIDE BLOCK
ADJ. KNOB
PRODUCT
GUIDE
CHANNEL
PRODUCT
GUIDE
PLATE
GUIDE
PLATE
CLAMP
WIDTH
SCALE