69
You have a doubt about whether your hob is working properly ....
...... this does not
necessarily mean there is a problem with your hob.
In all cases, check the following:
✓
Check the hob is cor
rectly connect
ed t
o
the power supply
.
✓
Check that the spar
k ignit
ers are clean.
✓
Check that the bur
ners are clean and cor
rectly assembled.
➤
Lighting the burners:
N
o
spar
k
s
appear when the t
ouch contr
ols are pressed.
✓
This is nor
mal. The ignition function is centralised and contr
ols all
bur
ners at the same time.
➤
When lighting a burner
, spark
s
appear on all the burners at the same
time.
✓
Check that the gas inle
t pipe is no
t pinched.
✓
Check that the length of the gas inle
t pipe is less than 2 me
tres.
✓
Check that the gas inle
t is open.
✓
If y
ou use gas fr
om a cy
linder or tank
, check that it is no
t em
p
ty
.
✓
If y
ou ha
ve
jus
t ins
talled the hob or chang
ed the gas cy
linder
, repeat
the operations f
or lighting the bur
ners se
ve
ral times until gas ar
riv
e
s
at the bur
ners.
✓
Check that the inject
or is no
t clogg
ed; if it is, unclog it with a safe
ty
pin.
✓
Light y
our bur
ner bef
ore placing y
our saucepan on it.
➤
There are spar
k
s, but the bur
ner does no
t light.
✓
A
void s
tr
ong air cur
rents in the r
oom.
✓
Check that the cor
rect inject
ors ha
ve
been f
itt
ed f
or the type of gas
being used (see the mar
kings on the inject
ors in the “
Gas settings
”
section).
✓
Reminder
: The default se
ttings on the hob are f
or a mains gas
supply (natural gas).
✓
Check that the gas supply chang
eo
ver switch is cor
rectly
positioned (see the “
Changing t
he gas supply
” section).
➤
In reduced heat mode, the burner goes out or the f
lames remain high.
✓
Check the cleanliness of the bur
ners and inject
ors under the
burners, the assembly of the bur
ners, e
tc.
✓
Check that there is enough gas in the cy
linder
.
➤
The f
lames are ir
regular or une
ven.
WHA
T TO DO
ERR
OR
CODE
EN
5
5 // SMALL FAULTS AND PROBLEMS
