49
•
Gas supplied by tank or
cylinder (butane/propane)
For your safety, you must choose from the
three following connection options:
— Use rigid copper pipe
with screw-on
mechanical connectors (G1/2 gas standard
mark). Connect directly to the elbow joint
fitted on the appliance.
— Use a flexible metal hose
(stainless steel)
with screw-on mechanical
connectors
(compliant with the NF D 36-125 standard)
with an unlimited guarantee
(Fig. 01).
A
B
Sealing washer (not provided)
Adaptor (not provided)
Hose clip (not provided)
C
— Use a reinforced rubber
hose
with screw-
on mechanical
connectors (compliant with
the NF D 36-112 standard) with a 10-year
guarantee
(Fig. 02).
In an existing system, a flexible pipe fitted
with hose clips (compliant with the XP D 36-
110 standard) with a 5-year guarantee may be
used. In this case an adaptor must be used
and a sealing washer must be inserted
between the adaptor and the elbow joint
(Fig. 03).
;
;
@
@
;
;
Q
Q
Fig. 01
Fig. 02
Fig. 03
A
B
C
EN
2
2 // INSTALLING YOUR APPLIANCE
Note
When connecting your hob’s gas supply, if you have to change the direction of
the elbow fitted on the appliance:
①
Unscrew the bolt whilst supporting the elbow ((F
Fiig
g.. 1
1)).
②
Change the seal (supplied in the plastic bag).
③
Screw in the bolt holding the elbow in the intended position with a
torque not exceeding 17 N.m ((F
Fiig
g.. 2
2)).
Nut
Elbow
Fig. 01
Fig. 02
