62
EN
3
3 // USING YOUR APPLIANCE
OPERATING SAFETY
•
•
G
ENERAL STOP
—
You can stop any gas burners currently
operating by pressing touch control
. This
action cancels locking if this had been
programmed.
•
T
EMPERATURE LIMITER (MODEL
DTI1127*)
—
Each cooking zone is equipped with a
safety sensor that constantly monitors the
temperature of the bottom of the cookware. If
you leave empty cookware on a zone which is
turned on, the power will be automatically
limited to prevent damage to the cookware or
hob.
•
P
ROTECTION AGAINST OVERFLOWS
—
In case of overflow, or of a metallic object or
wet cloth placed on the control buttons, the
hob turns itself off, the displays light up and a
beep sounds. Clean the hob or remove the
object, then begin cooking again.
•
A
UTO-STOP SYSTEM
—
Should you forget that cooking is in
progress, this safety function will
automatically turn the hob off after a
predefined time (between 1 and 8 hours
depending on the power setting).
“AS”
is
displayed and a beep sounds for about
2 minutes. Press on the main selector touch
control to delete this information. A beep will
confirm your setting.
•
“S
MALL OBJECTS” SAFETY DEVICE (MODEL
DTI1127*)
—
If you place a small object on the area (a
ring, a fork, etc), the hob will detect it and not
deliver any power. The power display will flash.
Note:
however, several small objects on the
cooking zone at the same time could be
identified as cookware. The hob will therefore
deliver power in this case.
Note
—
It is recommended to avoid placing
metal objects such as knives, forks, spoons
and lids on the cooking surface, as they
may heat up.
