DDC Total-AceXtreme BU-67301B Design Manual Download Page 140

Page: 140 / 141

Data Device Corporation

Leadership Built on Over 50 Years of Innovation

Data Device Corporation (DDC) is the world leader in the design and manufacture of high-reliability data bus

products, motion control, and solid-state power controllers for aerospace, defense, and industrial automation

applications. For more than 50 years, DDC has continuously advanced the state of high-reliability data

communications and control technology for MIL-STD-1553, ARINC 429, Synchro/Resolver interface, and

Solid-State Power Controllers with innovations that have minimized component size and weight while increasing

performance. DDC offers a broad product line consisting of advanced data bus technology for Fibre Channel

networks; MIL-STD-1553 and ARINC 429 Data Networking cards, components, and software; Synchro/Resolver

interface components; and Solid-State Power Controllers and Motor Drives.

DDC is a leader in the development, design, and manufacture of highly reliable and innovative military data bus

solutions. DDC's Data Networking Solutions include MIL-STD-1553, ARINC 429, and Fibre Channel. Each

Interface is supported by a complete line of quality MIL-STD-1553 and ARINC 429 commercial, military, and

COTS grade cards and components, as well as software that maintain compatibility between product generations.

The Data Bus product line has been field proven for the military, commercial and aerospace markets.

DDC is also a global leader in Synchro/Resolver Solutions. We offer a broad line of Synchro/Resolver instrument-

grade cards, including angle position indicators and simulators. Our Synchro/Resolver-to-Digital and Digital-to-

Synchro/Resolver microelectronic components are the smallest, most accurate converters, and also serve as the

building block for our card-level products. All of our Synchro/Resolver line is supported by software, designed to

meet today's COTS/MOTS needs. The Synchro/Resolver line has been field proven for military and industrial

applications, including radar, IR, and navigation systems, fire control, flight instrumentation/simulators, motor/

motion feedback controls and drivers, and robotic systems.

As the world’s largest supplier of Solid-State Power Controllers (SSPCs) and Remote Power Controllers (RPCs),

DDC was the first to offer commercial and fully-qualified MIL-PRF-38534 and Class K Space-level screening for

these products. DDC’s complete line of SSPC and RPC boards and components support real-time digital status

reporting and computer control, and are equipped with instant trip, and true I²T wire protection. The SSPC and

RPC product line has been field proven for military markets, and are used in the Bradley fighting vehicles and

M1A2 tank.

DDC is the premier manufacturer of hybrid motor drives and controllers for brush, 3-phase brushless, and

induction motors operating from 28 Vdc to 270 Vdc requiring up to 18 kilowatts of power. Applications range from

aircraft actuators for primary and secondary flight controls, jet or rocket engine thrust vector control, missile flight

controls, to pumps, fans, solar arrays and momentum wheel control for space and satellite systems.

Product Families

Military | Commercial Aerospace | Space | Industrial

Data Bus | Synchro/Resolver | Power Controllers | Motor Drives

Certifications

Data Device Corporation is ISO 9001: 2008 and AS 9100, Rev. C certified.

DDC has also been granted certification by the Defense Supply Center Columbus (DSCC) for manufacturing

Class D, G, H, and K hybrid products in accordance with MIL-PRF-38534, as well as ESA and NASA approved.

Industry documents used to support DDC's certifications and Quality system are: AS9001 OEM Certification,

MIL-STD-883, ANSI/NCSL Z540-1, IPC-A-610, MIL-STD-202, JESD-22, and J-STD-020.

Summary of Contents for Total-AceXtreme BU-67301B














































































































































Search results

Summary of Contents for Total-AceXtreme BU-67301B

Reviews:

Related manuals for Total-AceXtreme BU-67301B

Brands by name

Popular brands

DDC Total-AceXtreme BU-67301B, Design Manual

Search results

Summary of Contents for Total-AceXtreme BU-67301B

Reviews:

Related manuals for Total-AceXtreme BU-67301B

Brands by name

Popular brands