26
Installation
(for qualified installers only)
© Travis Industries
6/19/18 - 1418
DaVinci-Cat2+
Remove Components to Allow for Fireplace Joining
Remove Media Trays, Tension Rod Lock-Ties, and Burners Near Center of Fireplace
Remove the media trays and the burners near the center of the fireplace where the two fireplace modules
join (see illustration below and pictures on the following page). This allows for access to the area near
where the fireplaces join). Remove the lock-ties used to secure the tension rods during shipping.
Media Tray Removal
Remove the media trays from both fireplace modules (see pages 49 to 50).
NOTE
: when replacing
the media trays, make
sure the notch fits over
the overhead light wires.