Installation
(for qualified installers only)
29
© Travis Industries
6/19/18 - 1418
DaVinci-Cat2+
Slide the Fireplace Modules Together
MAKE SURE TO ROUTE THE INTAKE DAMPER WIRES
Before sliding the fireplace modules together, you will want to route the intake damper wires
from the master module to the secondary module. Route the wires through the intake channel
between the fireplaces and out the intake starter collar (see illustration below).
MAKE SURE ALL WIRING AND LED STRIPS ARE MOVED ASIDE.
These electrical components
should be moved aside so they do not become pinched or damaged. The LED strips near the areas
being joined should be positioned inwards (not through the grommeted holes – see pictures below).
Make sure the LED Wires are Positioned
Inwards Before Sliding Modules Together
After Titan Locks are Installed, Route LED
Wires Through the Grommeted Access Holes