24
Installation
(for qualified installers only)
© Travis Industries
6/19/18 - 1418
DaVinci-Cat2+
Alignment Track Installation
The alignment track is secured to the platform (or sub-floor). The fireplace modules are placed onto the
alignmnet track then joined together. This allows for proper fireplace alignment and a solid base for the
fireplace.
Before attaching the alignment track, make sure the platform (or sub-floor) is level and capable of
supporting the fireplace and vent. Use minimum ¾” plywood for the platform.
Assemble the alignment track using the included #8 screws (see “a” and “b” below). Once assembled, it
may be secured to the platform (see “c” below). Make sure to align the track to the platform and framing
(the front edge of the track is 3.375” (86mm) from the front edge of the fireplace and platform).
Verify the Alignment Track is Level Before Proceeding
Use a level to verify the alignment track is level (check several spots across the entire
length). Use shims (or washers/spacers) under the track, if necessary, to make sure the
track is level.
a
b
3.375" 86mm
c
3.375" 86mm
3.375" 86mm
