background image

3

Warranty

Comlab Telecommunications Inc. (Comlab) warrants all its products to be free from any defect in manufacture for a period

of two years after delivery to the original purchaser. All warranty returns must be authorized by a Comlab representative.

The limitation of liability under this warranty shall be to repair or replace any part of the product which proves to be

defective after inspection by Comlab. This warranty shall not apply to any Comlab product that has been disassembled,

modified, physically or electrically damaged, inappropriately installed, or any product that has been subjected to the

conditions exceeding the applicable specifications or ratings.

This warranty is the full extent of obligation and liability assumed by Comlab with respect to its products. Comlab neither

makes nor authorizes any person or company to make any other guarantee or warranty concerning its products.

Disclaimer

Comlab assumes no liability for any direct, indirect or consequential injury, loss, economic loss, damage, fines or

penalties incurred through the use, or inability to use Comlab products.

Comlab products are not intended for use in medical, life-saving, life-sustaining or critical applications. Comlab customers

using or selling Comlab products for use in such applications do so at their own risk and agree to fully indemnify Comlab

for any damages resulting from such improper use or sale.

Comlab reserves the right to make design changes to its products without incurring any obligation to make the same

changes to previously sold units.

Safety information

The Davicom unit should be installed by qualified technical personnel only. Installation of this device by an unqualified

person could result in hazardous conditions to the installer or other personnel, and/or damage to the unit or other

equipment. Ensure that proper safety precautions have been taken before installing this unit and any associated

equipment.

The Davicom unit is designed to meet standard safety requirements, and it is extremely important that it not be modified in

any way. Modification of this equipment will void the warranty and could pose a hazard to the user of this equipment or to

maintenance personnel.

Service of the Davicom should be performed by qualified technical personnel who are familiar with the unit. Note that the

Davicom unit is designed for indoor use in a dry location. Installation and operation in other locations could be hazardous.

Depending on your installation, the Davicom unit may contain HIGH VOLTAGES. Exercise caution

when working in and around the unit if it is connected to your site wiring. To ensure proper lightning

and power surge protection, make sure that the grounding terminal on the rear of the Davicom units

is securely connected to the ground wiring at the equipment site.

Summary of Contents for Cortex 320





























































































Reviews: