Davicom Cortex 320 Reference Manual Download Page 50

Page: 50 / 92

4.3. Inputs menu

VERY IMPORTANT

The Cortex menus and screens are dynamic and user-dependent, meaning they will show

more or less information based on a user’s access level, and whether a user is in control of the unit or not. If you

notice that certain buttons or control/command settings seem to be missing or are greyed-out, first check if you are

(still) in control, or make sure you have proper access level / access rights.

4.3.1.Generic Input Menus

The Cortex inputs have 3 very similar-looking menu screens which recur frequently. This section provides information on

these 3 generic screens. They are explained here to avoid repetition, but particularities will be mentioned when applicable.

Most screens initially appear empty and will fill-up as entries are added, while some others come with items already listed.

Summary of Contents for Cortex 320





























































































Search results

Summary of Contents for Cortex 320

Reviews:

Related manuals for Cortex 320

Brands by name

Popular brands

Davicom Cortex 320, Reference Manual

Search results

Summary of Contents for Cortex 320

Reviews:

Related manuals for Cortex 320

Brands by name

Popular brands