DATREND Systems venTest, Operating Manual

Page: 83 / 117

venTest OPERATORS MANUAL
4.13 Creating Test Procedures and Test Reports (optional)
Testing can be automated through the use of test Procedures or Checklists, using the facilities
provided in the (optional) vPad-Check system available from your Datrend Systems dealer. Vpad-
Check provides a variety of procedural task steps which are fully configurable by the user.
Procedures can be written which include: prompts, report headers, inspection tasks, limit tests for
data input, interfaces to other test devices (both Datrend and other company devices), branching
to skip test sections that are not applicable, loops to repeat sections that may apply to more than
one accessory part (eg. Ultrasound probe(s)), and show pictures/instructions/videos as part of a
test step.
A vPad-venTest plugin has been developed for vPad-Check that allows control of the venTest
during testing, and retrieval of test data as the test progresses. Test reports may be printed,
saved, and/or transmitted to a PC or to a CMMS system.
For additional information on the vPad-VT and/or vPad-Check system and its applicability to
automating your testing on venTest, contact your dealer or visit
www.datrend.com; and ask about
the MN-122 6100-128 vPad-VT Plugin Operators Manual; and, MN-084 6100-049 vPad-Check
Operators Manual, to get complete details on how the system can improve efficiency and
productivity in preventive maintenance and performance assurance testing.
Operation/Chapter 4
#
Page 69