Dataq DI-725/E, User Manual

Page: 17 / 108

DI–720/DI–722/DI–730 Series User Manual
Getting Started
7
3. Getting Started
Unpacking
The following items are included with each DI-720, DI-722, or DI-730 Series instrument. Verify that you have the
following:
• Your DI-720, DI-722, or DI-730 Series Instrument.
• Printer Port communications cable to connect the DI-7xx Series instrument to your computer's printer port.
• A USB cable (models DI-720-USB, DI-722-USB, or DI-730-USB only). Ethernet models do not include an
Ethernet cable.
• The W
IN
D
AQ
Resource CD. The W
IN
D
AQ
Resource CD contains all software required to run your instrument.
If you ordered W
IN
D
AQ
/Pro or W
IN
D
AQ
/Pro+ recording software (an extra-cost option), there will be a
sticker with a password on the sleeve of your CD-ROM. This password will give you access to that software.
If you did not order W
IN
D
AQ
/Pro or W
IN
D
AQ
/Pro+ recording software, the W
IN
D
AQ
/Lite recording soft-
ware will be available to you for free without a password.
If an item is missing or damaged, call DATAQ Instruments at 330-668-1444. DATAQ support will guide you through
the appropriate steps for replacing missing or damaged items. Save the original packing material in the unlikely event
that your unit must, for any reason, be sent back to DATAQ Instruments.
Applying Power to the DI-7xx Series Instrument
Use the following procedure to apply power to your DI-7xx Series instrument:
1. Plug the five-pin DIN end of the power adapter cable into the five-pin jack labeled POWER on the rear panel of
the instrument.
Power Adapter
To power supply (outlet)
Rear Panel
Power Adapter Cable
DI-720 or DI-730 Series Instrument