Datamax A-Class Mark II, Operator'S Manual

Page: 71 / 164

A-Class 61
Communications (continued)
Menu Item Details
FEEDBACK CHARACTERS
Allows the return of printer codes, where:
ENABLED
Sends the host a Hex 1E (RS) after each label
and a Hex 1F (US) after each batch successfully
prints.

DISABLED Sends no feedback characters.
ESC SEQUENCES
Sets handling for data containing invalid ESC
sequences, where:

ENABLED Processes commands normally.
DISABLED
Ignores ESC control codes during processing (as
some systems send “banners” to the printer).

Bitmapped font downloads will be disabled.
HEAT COMMAND
Determines how host Heat commands are
handled, where:

ENABLED Processes software commands normally.
DISABLED
Controls Heat via the menu setting; see Section
4.2.2.
SPEED COMMANDS
Determines how host Print, Feed, Reverse, and
Slew commands are handled, where:

ENABLED Processes software commands normally.
DISABLED
Controls speeds via the menu setting; see
Section 4.2.2.
TOF SENSING COMMANDS
Determines how host Gap, Continuous, and
Reflective commands are handled, where:

ENABLED Processes software commands normally.
DISABLED
Controls the Sensor Type via the menu setting;
see Section 4.2.2.
SYMBOL SET COMMAND
Determines how host Single and Double Symbol
Set commands are handled, where:

ENABLED Processes software commands normally.
DISABLED
Controls Symbol Set selection via the menu
setting; see Section 4.2.4.