Datamax A-Class Mark II, Operator'S Manual

Page: 48 / 164

38 A-Class
Printer Options (continued)
Menu Item Details
CUTTER
Controls the Cutter option, where:
MODE
Sets the detection method and response of the
printer, where:
DISABLED
Disables the option.

AUTO Detects, enables, and sets the label stop location
for the cutter; if not detected, the option will be
ignored.
ENABLED
Enables and sets the label stop location for the
cutter; if not detected, a fault will be generated.
CUT BEHIND
Allows a number of small labels to queue before a
cut is performed, increasing throughput, where:

This mode can be used without a cutter to
allow the presentation of an extra label, with
retraction occurring upon the next job or feed
operation.
(0 – 2)

0
Is the queue number.

After a fault or unknown label position, a
leading edge cut will be performed to ensure
against extra length on the first label;
otherwise, cutting will occur only as specified.
Ribbon Saver
Controls the Ribbon Saver option, where:
DISABLED
Disables the option.

AUTO Detects enables the option. If not detected, the
option will be ignored.
ENABLED
Enables the option. If not detected, a fault will be
generated.