Datamax A-Class Mark II, Operator'S Manual

Page: 54 / 164

44 A-Class
Printer Options (continued)
Menu Item Details
END OF PRINT
Sets the type of output signal generated to
indicate EOP, where:

LOW PULSE Outputs a low pulse upon completion.
HIGH PULSE
Outputs a high pulse upon completion.
ACTIVE LOW
Outputs a logic low upon completion.
ACTIVE HIGH
Outputs a logic high upon completion.
RIBBON LOW
Sets the low ribbon signal (as determined by
RIBBON LOW OPTIONS; see Section 4.2.1),
where:

ACTIVE LOW Outputs a logic low when the roll size reaches the
setting.
ACTIVE HIGH
Outputs a logic high when the roll size reaches
the setting.
SLEW ENABLE
Selects the type of input signal required to initiate
label slew, where:

STANDARD Triggers slew with a low signal.
LOW PULSE
Triggers slew with a low pulse.
HIGH PULSE
Triggers slew with a high pulse.
ACTIVE LOW
Triggers slew with a low signal.
ACTIVE HIGH
Triggers slew with a high signal.
ERR ON PAUSE (APP2)
Sets the output when a service required fault
occurs (Applicator Interface Card Type 2 equipped
only), where:

ENABLED Enables the output signal.
DISABLED
Disables the output signal.