Datalogic DV9500 Series, Installation Manual

Page: 13 / 90

INTRODUCTION
1
1
1 INTRODUCTION
The DV9500 series is made up of different camera models to cover any type of application
need. The various models depend on:
•
the focal length;
•
focus type, either fixed focus or autofocus system;
•
and for the video output type, either Camera-Link or LVDS.
NOTE
The LVDS model is available only on demand.
The camera is always part of a reading station, a more complex system that, for example,
can include:
- A set of illuminators. According to the application the following illuminators can be used:
LS-701, LS-504, LS-660 and LS-690.
- A set of sensors (optical encoder, presence sensor, distance sensor etc.).
- One DD9500 decoder for each camera.
- DC9500 controller.
- External Mirrors: EMK-400 o EMK-800.
Presence
sensor
Speed
sensor
Distance
Sensors
Decoder
Decoder
Ethernet hub/switch
Modem
Dedicated Phone
Line System
Remote Control
Ethernet Host
Connection
System
Remote Control
Host connection
Serial 232
Serial 422/485
Digital I/O
Ethernet
Profibus
Device-Net
Ethernet
Cables
Decoder
Decoder
Decoder
Control
and Power
Module
RS422
+ Power cable
Serial Ctrl Cable
Camera
Link
Lighting
Systems
Cameras
Figure 1 – Example of reading station
This chapter introduces a minimum set of concepts necessary for camera installation and
setting. Theoretical and practical information necessary to design an entire station exceed
the purpose of this document.