Datalogic AREX 401, User Manual

Page: 52 / 148

This error occurs if the temperature inside the laser source is out of
the operating temperature range. To reset the error, a Laser marker
restart is required
This error occurs if the power supply of the laser source is out of
range. To reset the error, a Laser marker restart is required
This error occurs if high optical power is reflected back to the laser
source. To reset the error, a Laser marker restart is required
This error occurs if the laser source detects an internal failure. To
reset the error, a Laser marker restart is required
TECHNICAL SPECIFICATIONS
44
AREX™ 401
Warning State
This state occurs if the turning on sequence has
not been followed. To restore normal laser marker
operation, repeat the turning on sequence
Blinking
LASER SOURCE
ERRORS
DESCRIPTION
TEMPERATURE ERROR
POWER SUPPLY ERROR
BACK REFLECTION
ERROR
GENERIC ERROR
STATE DESCRIPTION STATUS LED
WARNING INVALID
START SEQUENCE