TECHNICAL SUPPORT
88
AREX™ 401
TROUBLESHOOTING
If a problem occurs during operation, first check the following troubleshooting. If you
cannot fix the problem, contact Datalogic Customer Service (see “Technical Support” on
page vii).
Service Interface
The laser marker is equipped with a Service Interface integrated in
Lighter™ Laser Con-
figuration - Service
useful for service purpose.
The Service Interface provide the following information:
Laser marker serial number
Shows the FW and HW revision (separated by dot) installed in
the Laser Control Board
Counter of the laser marker working hours expressed in
hours and minutes
Shows the CPU temperature of the Laser Control Board
Shows the temperature measured by BOARD#1 sensor of the
control rack
Shows the temperature measured by BOARD#2 sensor of the
control rack
Shows the internal temperature of the Scan Head
DESCRIPTION
This counter is incremented every time the system tempera-
ture is out of the operating temperature range
This counter is incremented every time the scan head tem-
perature is out of the operating temperature range
This counter is incremented every time the service interface
detect a MMC error
Counter of the safety functions events. The safety functions
events counter is incremented every time the INTERLOCK or
LASER_STOP safety function are activated
SYSTEM INFO
INFO TYPE
DESCRIPTION
Serial Number
FW revision
System Working Hours
CPU Temperature
BOARD#1 Temperature
BOARD#2 Temperature
Scan Head Temperature
ERROR TYPE
System Temperature error
Scan Head Temperature error
Service Interface error
SAFETY INFO
INFO TYPE
DESCRIPTION
Safety relay switching
Summary of Contents for AREX 401
Page 1: ...AREX 401 USER MANUAL InfraRed Fiber Laser Marker...
Page 113: ...SLO INTEGRATION EXAMPLE USER MANUAL 105 SLO INTEGRATION EXAMPLE...
Page 140: ...RECOVER THE LASER MARKER 132 AREX 401 Press FINISH to continue Press YES to continue...
Page 145: ...USER MANUAL 137 APPENDIX G MECHANICAL DRAWINGS...
