Datalogic AREX 401, User Manual

Page: 63 / 148

CONNECTIONS
USER MANUAL
55
Connecting X3 - SLO connector
The X3 - SLO connector must always be inserted with proper signals provided in order to
use the laser marker. The absence of such connector blocks the laser emission.
Figure 46: Connecting X3 - SLO connector
WARNING: If built, do not use the SLO Muting Device for external devices,
since this will result in loss of the safety function of the machine to which
this product is installed.
Do not use the SLO Device except for maintenance of this product.
WARNING: It is the customer's responsibility to provide a correct integra-
tion of the safety signals according to applicable regulations.
NOTE: See "
Appendix B " on page 98
about the compliance to safety.