HOW TO USE COMMAND BOX SIGNALS TO MARK LAYOUT
USER MANUAL
119
HOW TO USE COMMAND BOX SIGNALS TO MARK LAYOUT
Automate the marking process allowing documents to be marked using external
X1.11
(START_MARKING
) and
X1.13
(
STOP_MARKING
) signals, which can be generated by PLC
or other external devices.
Click on the
Save to Device
button to save the layout in the device memory:
Click on the
Show Laser Engine
button to display Laser Engine window:
AUTO/MANUAL Mode
button allows switching between the two available working
modes:
•
Auto mode: the engraving operations are executed automatically using external
signals.
•
Manual mode: used for displaying the margins of the graphic objects to be marked
and to test layouts.
Documents tab:
lists all the proj-
ect or documents that have been
saved to the system
Laser marker State
Document preview:
this area
shows how the graphic objects
will be actually marked
Summary of Contents for AREX 401
Page 1: ...AREX 401 USER MANUAL InfraRed Fiber Laser Marker...
Page 113: ...SLO INTEGRATION EXAMPLE USER MANUAL 105 SLO INTEGRATION EXAMPLE...
Page 140: ...RECOVER THE LASER MARKER 132 AREX 401 Press FINISH to continue Press YES to continue...
Page 145: ...USER MANUAL 137 APPENDIX G MECHANICAL DRAWINGS...
