Datalogic AREX 401, User Manual

Page: 75 / 148

USER MANUAL
67
CHAPTER 6
CUSTOMIZE THE LASER MARKER
SOFTWARE
SYSTEM PROTECTION
The System Protection enhances the security of the system against disk corruption that
might be caused by unexpected system shutdowns or malware attacks and protects the
C:\ drive from unwanted changes.
When the System Protection is enabled, any change or deletion on the C:\ drive will be
restored after system reboot, otherwise when the System Protection is disabled any
modification will be stored on the disk and it will persist after reboot.
System Protection Tool
The System Protection tool shows the status of the System Protection and is visible on
the tray-bar icon in the lower- right corner of the screen.
A notification popup message that shows the status of System Protection is still visible
on the screen for a few seconds after system startup.
The tray-bar icon color represents the protection state:
• Red : the system protection is disabled
• Green : the system protection is enabled
• Yellow : the system must be rebooted to apply the new settings
CAUTION: When the System Protection is disabled, the system is not pro-
tected against disk corruption or malware attacks. Disable the System Pro-
tection only for the purpose of changing the OS parameters indicated in the
User Manual and for the time necessary to do such changes. The modifica-
tion of OS parameters other than those indicated in the User Manual, as
well as the installation of HW and / or SW not authorized or supplied by
Datalogic can adversely affect system stability and marking performance.
In case of system instability or performance degradation following SW /
HW modifications, restore the original laser marker configuration (see
Appendix B
).