Datakom D-500 MK3, User Manual

Page: 73 / 197

D-500 MK3 User Manual Firmware V-7.5
- 73 -
The unit performs a detailed set of AC measurements.
The list of measured AC parameters is below:
Mains voltage phase L1 to neutral
Mains voltage phase L2 to neutral
Mains voltage phase L3 to neutral
Mains average voltage phase to neutral
Mains voltage phase L1-L2
Mains voltage phase L2-L3
Mains voltage phase L3-L1
Mains frequency
Mains current phase L1
Mains current phase L2
Mains current phase L3
Mains average current
Mains kW phase L1
Mains kW phase L2
Mains kW phase L3
Mains total kW
Mains kVA phase L1
Mains kVA phase L2
Mains kVA phase L3
Mains kVAr phase L1
Mains kVAr phase L2
Mains kVAr phase L3
Mains pf phase L1
Mains pf phase L2
Mains pf phase L3
Mains total pf
Mains neutral current
Mains kWh - energy meter
Mains kVAr cap&ind - energy meter
Mains exported power
– kWh energy meter
Gen voltage phase L1 to neutral
Gen voltage phase L2 to neutral
Gen voltage phase L3 to neutral
Gen average voltage phase to neutral
Gen voltage phase L1-L2
Gen voltage phase L2-L3
Gen voltage phase L3-L1
Gen frequency
Gen current phase L1
Gen current phase L2
Gen current phase L3
Gen average current
Gen kW phase L1
Gen kW phase L2
Gen kW phase L3
Gen total kW
Gen kVA phase L1
Gen kVA phase L2
Gen kVA phase L3
Gen kVAr phase L1
Gen kVAr phase L2
Gen kVAr phase L3
Gen total kVAr
Gen pf phase L1
Gen pf phase L2
Gen pf phase L3
Gen total pf
Gen Neutral current
Gen kWh - energy meter
Gen kVArh cap&ind - energy meter
Below engine parameters are always measured:
Engine speed (rpm)
Battery voltage,
Charge voltage
The unit features 5 analog senders, fully configurable for the name and function.
Below is a typical list of analog senders, capable of changing following configuration:
Coolant temperature
Oil pressure (bar, Psi)
Fuel level (%, liters)
Oil temperature (°C, °F)
Canopy temperature (°C, °F)
10.5. MEASURED PARAMETERS