88
5.0 UPC Types
Enable Discrete 2 of 5
(0x01)
*Disable Discrete 2 of 5
(0x00)
5.7 Discrete 2 of 5
5.7.1
Enable/Disable Discrete 2 of 5 :
Parameter # 0x05
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
5.7.2
Set Lengths for Discrete 2 of 5 :
Parameter # L1 = 0x14, L2 = 0x15
The length of a code refers to the number of characters (i.e., human read-
able characters), including check digit(s) the code contains. Lengths for
D 2 of 5 may be set for any length, one or two discrete lengths, or lengths
within a specific range.
•
One Discrete Length
- Select this option to decode only those codes
containing a selected length. For example, select
D 2 of 5
-
One Dis-
crete Length
, then scan
1
,
4
, to decode only D 2 of 5 symbols con-
taining 14 characters. Numeric bar codes are in
Section 5.5
on page
95
. To change the selection or cancel an incorrect entry,scan
Cancel
in
Section 5.5.1
on page
95
.
D 2 of 5 - One Discrete Length
D 2 of 5 - Two Discrete Lengths
•
Two Discrete Lengths
- Select this option to decode only those
codes containing two selected lengths. For example, select
D 2 of 5
-
Two Discrete Lengths
, then scan
0, 4, 1,
2
(single digit numbers
must be preceded by a leading zero). Numeric bar codes begin on
page 8-71. To change the selection or cancel an incorrect entry, scan
Cancel
in
Section 5.5.1
on page
95
.
D 2 of 5 - Length Within Range
•
Length Within Range
- Select this option to decode only codes
within a specified range. For example, to decode D 2 of 5 symbols
containing between 4 and 12 characters, first scan
D 2 of 5
-
Length
Within Range
. Then scan
0, 4, 1
and
2
(single digit numbers must
always be preceded by a leading zero). Numeric bar codes are in
Sec-
tion 5.5
on page
95
. To change the selection or cancel an incorrect
entry, scan
Cancel
in
Section 5.5.1
on page
95
.
D 2 of 5 - Any Length
•
Any Length
- Scan this option to decode D 2 of 5 symbols containing
any number of characters.
NOTE:
Selecting this option may lead to misdecodes for D 2 of 5
codes.
Enable Chinese 2 of 5
(0x01)
*Disable Chinese 2 of 5
(0x00)
5.8 Chinese 2 of 5
5.8.1
Enable/Disable Chinese 2 of 5 :
Parameter # 0xF0 0x98
To enable or disable Chinese 2 of 5, scan the appropriate bar code below.
Enable Codabar
(0x01)
*Disable Codabar
(0x00)
5.9 Codabar
5.9.1
Enable/Disable Codabar :
Parameter # 0x07
To enable or disable Codabar, scan the appropriate bar code below.