29
2.0 Getting Started
Enter a Custom COM Port Name
1. Tap the
Settings
button to open the Link*One
Settings
window.
2. The Settings window will open. Note that the current COM setting is
highlighted when the
Settings
window opens.
3. Type the name of the custom COM port in the
Port
box.
4. Tap the
OK
button and the custom COM port name will be saved.
2.9.4.1.2
DTR High / RTS High
When DTR High or RTS High is checked, the corresponding handshake
signal of the serial port will be set. Some serial devices require these to
be set to enable communication.
NOTE:
The DTR and RTS handshake signal can be controlled dynami-
cally from a script.
2.9.4.1.3
Hardware Pin Events
In a serial port there are four incoming signals called CTS, DSR, RI,
and DCD. Link*One can be set up to monitor these signals and generate
an event when a signal is changed. An event can be generated when the
signal goes high and/or when it goes low.
1. Tap the
Hardware Pin Events
button.
2. Place check marks next to the signals to be monitired by tapping
with the Stylus.