68
3.0 Operating the Unit
3.2.8.4
DefaultFocus = 3733
Not used in this version of DAP-Imager.
3.2.8.5
Aimer = ON
Not used in this version of DAP-Imager.
3.2.8.6
DecodeAfterAutofocus = ON
Not used in this version of DAP-Imager.
3.2.8.7
MaxNbrResults = 1
When several barcodes are visible in an image, the decoder can return
more than one result. Set this value to the maximum number of results
that are considered. If 1, the first result is returned and the others are
discarded.
3.2.8.8
DecodeTimeoutMs = 1500
Maximum duration of a decode operation, in milliseconds. If the de-
code operation takes longer, it is cancelled. Using a small timeout won’t
allow decoding most barcodes. Using a higher value may have an im-
pact on the user interface responsiveness.
3.2.8.9
MaxNbrAttempts = 1
In the Standard or DecTrigUp UI policies, number of attempts DAP-
Imager tries to decode before returning NO READ.
3.2.8.10 InactiveTimeBeforeStandbyLevel1 =
10000
Number of milliseconds before the flash light is turned off.
3.2.8.11
InactiveTimeBeforeStandbyLevel2 =
10000
Number of milliseconds before the camera is stopped when the trigger
is not pressed. Waking up the camera takes a few seconds. If you scan
barcodes often, you may want to increase this value. Decrease it to save
power.
3.2.8.12 KbWedge = OFF
Set this option to ON if you don’t use ScannerManager and want to
wedge barcodes.
3.2.8.13 AddTab = OFF
When KbWedge is ON and a barcode is wedged, simulates a TAB key
after the barcode data.
3.2.8.14 AddEnter = ON
When KbWedge is ON and a barcode is wedged, simulates a RETURN
key after the barcode data.
3.2.8.15 Preamble =
When KbWedge is ON and a barcode is wedged, this value is prefixed
to the barcode data.
3.2.8.16 Postamble =
When KbWedge is ON and a barcode is wedged, this value is appended
to the barcode data.
3.2.8.17 InterCharDelay = 0
When KbWedge is ON and a barcode is wedged, sets the delay between
each key that is simulated, in milliseconds.
3.2.8.18 MaxGainWithoutMVLight = 2500
Not used in this version of DAP-Imager.
3.2.8.19 MinGainWithMovieLight = 1000
Not used in this version of DAP-Imager.
3.2.8.20 MaxGain = 4000
Not used in this version of DAP-Imager.
3.2.8.21 GainStep = 200
Not used in this version of DAP-Imager.
3.2.8.22 IdealGain = 2000
Not used in this version of DAP-Imager.
3.2.8.23 FlashIntensityStep = 100
Not used in this version of DAP-Imager.
3.2.8.24 MaxFlashIntensity = 100
Not used in this version of DAP-Imager.
3.2.8.25 MaxShutter = 4000
Not used in this version of DAP-Imager.
3.2.8.26 ShutterStep = 260
Not used in this version of DAP-Imager.
3.2.8.27 IdealShutter = 575
Not used in this version of DAP-Imager.
3.2.8.28 AppendSymbology = OFF
When ON, DAP-Imager will wedge the name of the symbology after
the barcode data. It can be used to find out the symbology of a barcode.
3.2.9 [OCR]
OCR not yet supported in this version of DAP-Imager.
3.2.10 [ImagerModes]
3.2.8.1
ModeList = Portrait,Landscape,Macro,B
arcode,
Lists the modes that appear in the camera mode menu. The modes spec-
ified here must be defined in the sections that follow.
3.2.11 [ImagerMode:XXXX]
This sections defines a given imager mode (XXXX), as listed in ModeL-
ist. Not all values are used; it depends on the ModeType option.
3.2.11.1
ModeType = 0
A value of 0 indicates that it’s a mode to take pictures.
A value of 1 is for barcode decoding.
3.2.11.2
IconID = 142
Resource ID of the icon to be shown in the mode menu. You can use a
resource editor to view the icons that are available (for example: http://
www.resedit.net/).
3.2.11.3
SelectionButtonImageFileName = res\
button-mode-portrait80.png
File path of the image shown when the mode is selected (mode button).